[. . . ] 8 GB Hair dryer Dear Customer Before using the appliance, the user must read the following instructions carefully. Connection to the mains supply The hair dryer should only be connected to an earthed socket installed in accordance with the regulations. Make sure that the supply voltage corresponds with the voltage marked on the rating label of the hair dryer. [. . . ] Should this occur, immediately disconnect the appliance from the mains power and allow sufficient time for it to cool down before the blockage is removed and the appliance is switched on again. To prevent damage to the power cord, - do not bend or kink the cable, especially where it leaves the housing, - do not pull on the cord, - do not coil the power cord around the appliance. Always switch off and remove the plug from the wall socket after use, as well as ■ ■ ■ ■ ■ ■ ■ ■ - in cases of malfunction, and - during cleaning. When removing the plug from the wall socket, never pull on the power cord; always grip the plug itself. Do not place the appliance on any surfaces sensitive to heat during or immediately after use. Children should be supervised to ensure that they do not play with the appliance. Caution: Keep any packaging materials well away from children, as they are a potential source of danger e. No responsibility will be accepted if damage results from improper use, or if these instructions are not complied with. In order to comply with safety regulations and to avoid hazards, repairs of electrical appliances must be carried out by qualified personnel, including the replacement of the power cord. If repairs are needed, please send the appliance to one of our customer service departments. Cleaning and care ■ Before cleaning the hair dryer, remove the plug from the wall socket and let the appliance cool down completely. –  To avoid the risk of electric shock, do not clean the hair dryer with water nor immerse it in water. - If necessary, the housing of the hair dryer may be wiped with a dry lint-free cloth. - Always check the air intake openings for accumulated lint particles or hair and remove any found. [. . . ] If within the 10 Styling nozzle The styling nozzle can be fitted to the air outlet to facilitate shaping the hair during blow drying. Operation Connect the hair dryer to a suitable wall socket and use the slide switch to select the desired power setting. Guarantee period, please also provide the guarantee card and proof of purchase. [. . . ]